standbad.blogg.se

If the Media Creation Tool does not work or you do not want to use it, then you can try Rufus, a popular free third-party tool that allows you to create an installation media with support for UEFI devices.

How to create Windows 10 UEFI boot media with Rufus (3) Hold and press the key while you press the power button to turn on the system. You can select either UEFI or non-UEFI boot device from the list.Once you complete the steps, the Media Creation Tool will download the files and will create a bootable USB flash drive that you can use to install Windows 10 on computers with support for UEFI and BIOS.

Save and exit bios to keep this setting but you may want to change it back later to avoid booting to external devices/disks accidentally when they are plugged in/installed. (2) Enter BIOS -> Select -> Change the boot device priority so that your USB drive/CD-ROM is the first boot device. (1) Enter BIOS -> Select -> Select USB drive/CD-ROM under the options Be aware that you would see 2 different boot options for your boot device so make sure to select the correct one or try both UEFI and non-UEFI boot options if you're not sure which is correct. You can boot the system from USB drive/CD-ROM by the following three methods. Make sure the USB drive or CD/DVD disk you want to boot to is inserted/installed before pressing F10 to save and exit the bios settings, otherwise, your boot device/disk may not be detected.ĥ. Also, under the boot menu, select 'CSM (Compatibility Support Module)' and confirm the 'Launch CSM' setting is on 'Auto' (which should be the default) or that it is Enabled.Ĥ. Hit the 'ESC' key to return to the previous Boot menu screen.ģ.

Select 'Secure Boot' and change the 'OS Type' setting to 'Other OS' to disable secure boot. Once you enter the BIOS configuration, please go to tab. If it's difficult to catch and the system boots to Windows instead, hold the Shift key while you restart Windows to enter ' Advanced startup' and look under the 'troubleshoot'/advanced options for the 'UEFI Firmware settings' to enter the BIOS.ġ. If you want to boot the system from USB drive/CD-ROM, you need to enter BIOS to set up configuration by holding the 'Delete' key or 'F8' key (choose 'Enter Setup' when the menu appears) after powering on the unit. Windows 10 - How to boot the system from USB drive/CD-ROM on the G11CD Desktop?